Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Esskay |
Drilling Diameter | 40 mm |
Over All Height | 6 ft |
Hole Diameter | 25-50 mm |
Number Of Shaft | 3 |
Item Weight | 1500 kgs |
Work Table | 36 X 36 Inches |
Lifting Motor | 2hp x 1440 rpm |
Distance Spindle Axis And Column | 1200 mm and 1500 mm on extra cost |
Max Spindle Speed | 1000 rpm |
Power Consumption | 5 hp |
Automatic Grade | Automatic |
Power Consumption in Watt | 5000 watt |
"ESSKAY" is a Leading Manufacturer and Exporters of All types of Auto feed radial drilling machine in india and Overseas.
Customisation is Available in all size of drilling machines
Drilling is a cutting process that uses a drill bit to cut or enlarge a hole of circular cross-section in solid materials. The drill bit is a rotary cutting tool, often multipoint. The bit is pressed against the workpiece and rotated at rates from hundreds to thousands of revolutions per minute. This forces the cutting edge against the workpiece, cutting off chips (swarf) from the hole as it is drilled.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Brand | Esskay |
Drilling Diameter | 40 mm |
Over All Height | 6FT |
Number Of Shaft | 3 |
Work Table | 36 X 36 Inches |
Lifting Motor | 2HP |
Distance Spindle Axis And Column | 1200 MM |
Hole Diameter | 25-50 mm |
Max Speed | 1000 RPM |
Max Spindle Speed | 1000 RPM |
Power Consumption | 5 KW |
Automatic Grade | Automatic |
Item Weight | 1500 KGS |
Model Number | EK-40 |
Drilled holes are characterized by their sharp edge on the entrance side and the presence ofburrson the exit side (unless they have been removed). Also, the inside of the hole usually has helical feed marks.
Drilling may affect the mechanical properties of the workpiece by creating lowresidual stressesaround the hole opening and a very thin layer of highlystressedand disturbed material on the newly formed surface. This causes the workpiece to become more susceptible tocorrosionandcrack propagationat the stressed surface. A finish operation may be done to avoid these detrimental conditions.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Drill Depth | 30-40 mm |
Brand | Esskay |
No Load Speed | 0-500 |
Machine Type | Semi Automatic |
Capacity | 32MM |
Additional Information:
Product Details:
Brand | Esskay |
Drilling Diameter | 60mm |
Hole Diameter | 50-100 mm |
No Load Speed | 0-1000 |
Capacity | 60 mm |
Column Diameter | 400 mm |
Bore Size | 75mm |
Maximum Speed | 500 rpm |
Motor Power | 7.5 hp |
Pillar Diameter | 400 mm |
Pillar Height | 7ft |
Drill Depth | 300 mm |
Automatic Grade | Automatic |
Radial drilling machine is one of the types of drilling machines. Radial Drilling Machine is a machine in which the drilling head is mounted to slide along a radial arm which can be rotated, raised, or lowered on a vertical mast to adjust the position of the drill above the work piece. It has transformed a lot of complex manufacturing processes into very simple tasks. It is an important tool that is used in several industrial and commercial operations such as construction, wood working, metal working etc. Radial drilling machine is used for numerous functions that include drilling, reaming, boring, tapping, counter boring, lapping, screwing and spot facing. These are capable of drilling a wide range of materials made from cast iron, steel, plastic etc. Our Radial Drilling Machines has a huge demand in domestic as well as international market due to its high performance and longer working life.
The radial drill machine India makes it suitable for very large work. Arm of radial drill can be rotated 180 degrees. The most important components of radial drill are as under
ColumnIt is the part of the radial arm drill press which holds the radial arm which can be moved around according to its length.Arm raiseAdjusts the vertical height of the radial arm along the column.
On/Off ButtonIt is the switch that activates and deactivates the drill press. Arm ClampIt secures the column and the arm in place
TableIt is the area where the work pieces are fed and worked on.
BaseIt is the radial arm drill press part that supports the column and the table. SpindleIt is the rotated part of the drill press which holds the drill chuck used in holding the cutting tool.
rilled holes are characterized by their sharp edge on the entrance side and the presence ofburrson the exit side (unless they have been removed). Also, the inside of the hole usually has helical feed marks.[3]
Drilling may affect the mechanical properties of the workpiece by creating lowresidual stressesaround the hole opening and a very thin layer of highlystressedand disturbed material on the newly formed surface. This causes the workpiece to become more susceptible tocorrosionandcrack propagationat the stressed surface. A finish operation may be done to avoid these detrimental conditions.
Additional Information: